Administrator's Guide

Screen reference
555-233-506870 Issue 5 October 2002
Custom Selection of VIP DID Numbers
This field allows you to select the DID number assigned to a room when a guest
checks in. This field can be accessed only if the Automatic Selection of DID
Numbers field is
y.
Daily Wakeup
Default Announcement Extension
This field appears only when the Announcement Type field is mult-integ. This
indicates the default wakeup announcement extension when using the integrated
announcement circuit pack.
Digit to Insert/Delete
Enter the leading digit that may be deleted and inserted back as described in the
following text. The current PMS message set uses the extension number as the
room identifier. In many customer configurations, the leading digit of the
extension number is dropped to screen the room number. In order to accommodate
PMS devices that are based on room number and not extension, this leading digit
may be deleted on messages from the switch to the PMS, and then inserted back
on messages from the PMS.
NOTE:
The PMS interface supports 3-, 4-, or 5-digit extensions, but prefixed
extensions do not send the entire number across the interface. Only the
assigned extension number is sent. Therefore, you should not use prefixed
extensions for numbers that are also going to use the Digit to Insert/Delete
function.
Valid entries Usage
y/n
Enter y to allow you to select the DID number assigned to a
room when a guest checks in.
Valid entries Usage
y/n
Enter y if each extension can request daily wakeup calls.
Valid entries Usage
valid extension or VDN Enter the extension of the announcement you want
to use for default wakeup calls.
Valid entries Usage
0
to 9