Administrator's Guide

Screen reference
555-233-506884 Issue 5 October 2002
Time Warning Threshold
Appears if the Queue field is y and when the Calling Warning Port and the Time
Warning Port fields are
X. Enter the time in seconds that a call can remain in the
queue before the System flashes the Queue status lamps (feature buttons assigned
members phones) and the Auxiliary Queue Time Warning lamp assigned to this
split/skill.
(Time Warning) Extension
Appears if the Queue field is y. An extension is needed when an X is placed in
Time Warning Port. This extension can be used by the Terminal Translation
Initialization (TTI) feature to assign a port to this extension from the port itself.
Once Time Warning Port is assigned a valid port (either via TTI or the
change
hunt-group
command), then the extension is removed and considered
unassigned.
(Time Warning) Port
Appears if the Queue field is y. Enter the seven-character port number assigned to
the Auxiliary Queue Time Warning lamp that flashes when the time entered in
Time Warning Threshold has been reached by a call in queue.
NOTE:
This port is assigned to an Analog Line circuit pack or given an “X”
designation if an extension is used.Enter the necessary characters.
Valid entries Usage
0
to 999 or
blank
An entry of 0 provides a warning whenever a call is queued.
Valid entries Usage
Enter an unassigned extension. This field may not be blank.
Valid entries Usage
01
through 44
(DEFINITY R) or
01 through 03
(DEFINITY CSI, SI) or
1 through 64
(S8700 IP-Connect /
S8700 Multi-Connect /
S8300 Media Server)
First and second characters are the cabinet
number
A through E Third character is the carrier