Administrator's Guide

IP Network Region
Issue 5 October 2002 917555-233-506
Location
Specifies the location by IP network region allowing correct date and time
information and trunk routing based on IP network region.
RTCP Enabled
UDP Port Range
UPD Port Range Max
Specifies the maximum range of the UDP port number used for audio transport.
Valid entries Usage
1-44
(For DEFINITY R, CSI, SI only.) Enter the number for the
location for the IP network region. The IP endpoint uses
this as its location number. This applies to IP telephones
and softphones.
1-64
(For Avaya S8300 Media Server, Avaya S8700
Multi-Connect, and Avaya S8700 IP-Connect only.) Enter
the number for the location for the IP network region. The
IP endpoint uses this as its location number. This applies to
IP telephones and softphones.
blank
The location is obtained from the cabinet containing the
CLAN that the endpoint registered through or the media
gateway containing the Internal Call Controller or Local
Spare Processor on an Avaya S8300 Media Server that the
endpoint registered through. This applies to IP telephones
and softphones. Traditional cabinets, Remote Offices, and
the Avaya S8300 Media Server all have their locations
administered on their corresponding screens.
Valid entries Usage
y/n
Specifies whether you want to enable RTCP. If this
field is set to
y, then the RTCP Monitor Server
Parameters fields appear.
Valid entries Usage
3-65535
Enter the highest UDP port number to be used for audio
transport.