Administrator's Guide

IP Network Region
Issue 5 October 2002 919555-233-506
Use Default Server Parameters
This field only appears when the RTCP Enabled field is set to y.
DiffServ/TOS Parameters
BBE PHB Value
This field contains the Better than Best Effort (BBE) PHB value.
Call Control 802.1p Priority
Provides Layer 2 priority for Layer 2 switches.
Call Control Value
Provides scalable service discrimination in the Internet without per-flow state and
signaling at every hop. Use the IP TOS field to support the DiffServ codepoint.
Valid entries Usage
y
Enter y to use the default RTCP Monitor server
parameters as defined on the IP Options System
Parameters screen. If set to
y, you must complete the
Default Server IP Address field on the IP Options
System Parameters screen.
n
If you enter n, you need to complete the Server IP
Address, Server Port, and RTCP Report Period fields
that appear.
Valid entries Usage
0-63
Enter the decimal equivalent of the DiffServ BBE PHB
value.
Valid entries Usage
0-7
Specifies the 802.1p priority value.
Valid entries Usage
0-63
Enter the decimal equivalent of the Call Control PHB
value.