Administrator's Guide

Screen reference
555-233-506934 Issue 5 October 2002
IP Services screen (Session Layer Timers page)
Use this screen to enable reliable protocol for TCP/IP links, and to establish other
session-layer parameters. This screen only appears if you enter CDR1, CDR2,
PMS_JOURNAL, or PMS_LOG in the Service Type field on page 1 or 2.
Screen 150. IP Services screen (Session Layer Timer page)
Connectivity Timer
Packet Resp Timer
PMS_LOG
Use this to connect the PMS log printer over a
TCP/IP link.
SAT
System administration terminal. Not available on
S8100 Media Server with a CMC1.
SYS_PRINT
Use this to connect the system printer over a
TCP/IP link.
Valid entries Usage
1–255
Indicates the amount of time (in seconds) that the
link can be idle before the switch sends a
connectivity message to ensure the link is still up.
Valid entries Usage
1–255
Determines the number of seconds to wait from
the time a packet is sent until a response
(acknowledgement) is received from the far-end,
before trying to resend the packet.
Valid entries Usage
change ip-services Page 3 of 3
SESSION LAYER TIMERS
Service Reliable Packet Resp Session Connect SPDU Connectivity
Type Protocol Timer Message Cntr Cntr Timer
CDR1 y 3 1 1 1