Administrator's Guide

ISDN trunk group
Issue 5 October 2002 943555-233-506
Field descriptions for page 1
Many of the fields on the following screens are described in ‘‘Trunk Group’’ on
page 1233. If a field on this screen is unique, it is listed and defined.
Screen 151. ISDN Trunk Group screen
The Calling Number – Delete, Insert, and Numbering Format fields are the
administrable fields for the Calling Line Identification Prefix feature. They appear
when the Direction field is
incoming or two-way.
Calling Number – Delete
Calling Number – Insert
Valid entries Usage
1
to 15 Enter the number of digits, if any, to delete from the calling
party number for all incoming calls on this trunk group.
all
blank
Valid entries Usage
Enter up to 15
characters (
0- 9)
Enter the specific digits, if any, to add to the beginning
of the digit string of incoming calls when the calling
party is a member of this trunk group.
blank
add trunk-group next Page 1 of x
TRUNK GROUP
Group Number: xxx Group Type: isdn CDR Reports: y
Group Name: OUTSIDE_CALL_______________ COR: 1_ TN: 1__ TAC: ____
Direction: two-way_ Outgoing Display? n Carrier Medium: PRI/BRI
Dial Access? n Busy Threshold: 99_ Night Service: ____
Queue Length: 0__
Service Type: ________________ Auth Code? n TestCall ITC: rest
Usage Alloc:_________________________Far End Test Line No: _______________
TestCall BCC: 4 TestCall Service: ______________
TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send TCM,Lookahead: 6
Max Message Size to Send: 260 Charge Advice: none_____________
Supplementary Service Protocol: a Digit Handling(in/out):overlap/overlap
Digit Treatment: insertion Digits: 1234
Trunk Hunt: cyclical QSIG Value-Added? n
Digital Loss Group: __
Calling Number - Delete: ___ Insert: _______________ Numbering Format: _______
Bit Rate: 1200_ Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0__