Administrator's Guide

Screen reference
555-233-506946 Issue 5 October 2002
Codeset to Send National IEs
This field defines the codeset for sending the information element (IE) for
national IEs. National IEs include all IEs previously sent only in code set 6 (such
as DCS IE). Now these national IEs, including Traveling Class Marks (TCMs)
and Lookahead Interflow (LAI), can be sent in code set 6 or 7. The value depends
on the type of switch the user is connected to.
NOTE:
A Traveling Class Mark (that is, the user’s FRL or the user’s trunk group
FRL) is passed between tandem nodes in an ETN in the setup message only
when the Service Type field is
tandem. It then is used by the distant tandem
switch to permit access to facilities consistent with the originating user’s
privileges.
Digit Handling (in/out)
This field defines whether overlap receiving and overlap sending features are
enabled. Set the field to
overlap when you want overlap receiving or overlap
sending. Set to
enbloc when you do not want these features enabled. The first
field value indicates digit receiving and the second value indicates digit sending.
Without overlap receiving or sending enabled, the digits on incoming and
outgoing calls are sent enbloc. If the Digit Handling field is
overlap/enbloc or
overlap/overlap, the following results:
— Incoming Call Handling Treatment table does not appear
— The Digit Treatment and Digits fields appear
— Warning message indicates that all Incoming Call Handling entries are
removed when screen is submitted
— When screen is submitted with these values, all Incoming Call Handling
entries are removed
Valid entries Usage
6
Other types.
7
System 85 R2V4, 4E11, or newer switch types
Valid entries Usage
enbloc/enbloc
enbloc/overlap
overlap/enbloc
overlap/overlap