Administrator's Guide

ISDN trunk group
Issue 5 October 2002 955555-233-506
Maximum Size of UUI IE Contents
This field appears when the UUI IE Treatment field is shared. Enter the
maximum number of bytes of user information that the network supports.
NCA-TSC Trunk Member
Identifies the trunk member whose D-channel will be used to route tandem
NCA-TSCs or QSIG CISCs. Value range for this field is from 1 to the maximum
number of members per trunk group supported on the switch or blank.
Network (Japan) Needs Connect Before
Disconnect
Sends an ISDN Connect message just prior to the Disconnect message.
Numbering Format
This field appears if the Send Calling Number field is y or r or the Send
Connected Number field is
y or r. This specifies the encoding of Numbering Plan
Indicator for identification purposes in the Calling Number and/or Connected
Number IEs, and in the QSIG Party Number. Valid entries are
public, unknown,
private, and unk-pvt. Public indicates that the number plan according to CCITT
Recommendation E.164 is used and that the Type of Number is national.
Unknown indicates the Numbering Plan Indicator is unknown and that the Type
of Number is unknown.
Private indicates the Numbering Plan Indicator is PNP
and the Type of Number is determined from the ISDN Private-Numbering screen.
An entry of
unk-pvt also determines the Type of Number from the ISDN
Private-Numbering screen, but the Numbering Plan Indicator is unknown.
Outgoing Channel ID Encoding
Appears only if the Group Type field is isdn and the Service Type field is
anything except
dmi-mos or sddn. Determines whether to encode the Channel ID
IE as preferred or exclusive. Blank is not a valid entry. Defaults are determined as
follows:
If the Group Type field is
isdn and the Used for DCS field is y, default is
exclusive.
If the Group Type field is
isdn and the Used for DCS field is n, default is
preferred.
Valid
entries Usage
32-128