Administrator's Guide

ISDN trunk group
Issue 5 October 2002 957555-233-506
If set to y, the ISDN Numbering - Public/Unknown Format screen is accessed to
construct the actual number sent, or the ISDN Numbering-Private screen (based
on Numbering Format) is used. If set to
r, the connected number is sent
“presentation restricted.”
Send Calling Number
Specifies whether the calling party’s number is sent on outgoing or tandemed
ISDN calls. Valid entries are
y, n, or r (restricted). If y is entered, the ISDN
Numbering - Public/Unknown Format screen is accessed to construct the actual
number to be sent, or the ISDN Numbering-Private screen (based on the
Numbering Format field) is used. If the value is
r, the calling number is sent
“presentation restricted.”
NOTE:
The ISDN Numbering - Public/Unknown Format screen can override the
Send Calling Number field entry for any administrable block of extensions.
Send Codeset 6/7 LAI IE?
Specifies whether the ISDN trunk should transmit information in Codeset 6/7. If
the UUI IE Treatment field is
shared, then this field should be n. Otherwise, the
same information will be sent twice and may exceed the message size. Default is
y
for pre-DEFINITY 6.3 compatibility.
Send Connected Number
Appears if the QSIG Value-Added field on the Trunk Group screen is n. Specifies
if the connected party’s number is sent on incoming or tandemed ISDN calls.
Valid entries are
y, n, or r (restricted). If y is entered, the ISDN Numbering -
Public/Unknown Format screen is accessed to construct the actual number sent, or
the ISDN Numbering-Private screen (based on the Numbering Format field) is
used. If the value is
r, the connected number is sent “presentation restricted.”
NOTE:
The AT&T Switched Network Protocol does not support restricted displays
of connected numbers. Therefore, if you administer the 1a
country-protocol/protocol-version combination on the DS1 screen, you
should not administer the Send Connected Number field to
r (restricted) on
the ISDN Trunk Group screen, as this causes display problems.
NOTE:
The ISDN Numbering - Public/Unknown Format screen overrides the Send
Connected Number field entry for any administrable block of extensions.