Administrator's Guide

ISDN trunk group
Issue 5 October 2002 969555-233-506
Contiguous
Specifies whether or not to hunt contiguous NXDS0 channels. This field only
appears if the NxDS0 field is
y.
The trunk/hunt algorithm to satisfy an NXDS0 call is as follows:
— Enter
y to specify the “floating” scheme. NXDS0 calls are placed on
a contiguous group of B-channels large enough to satisfy the
requested bandwidth without constraint on the starting channel (no
fixed starting point trunk).
NOTE:
H0 and NXDS0 “floating” scheme cannot both be y.
— Enter
n to specify the “flexible” scheme. NXDS0 calls are placed on
any set of B-channels on the same facility as long as the requested
bandwidth is satisfied. There are no constraints such as contiguity of
B-channels or fixed starting points.
NxDS0
Enter y to specify the “N by DS-zero” multi-rate service.
Field Descriptions for the Group Member
Assignments page
Screen 159. ISDN Group Member Assignments
add trunk-group next Page y of x
TRUNK GROUP
Administered Members(min/max): xxx/yyy
GROUP MEMBER ASSIGNMENTS Total Administered Members: xxx
Port Code Sfx Name Night Sig Grp
1: _______ _____ _ __________ _____ ___
2: _______ _____ _ __________ _____ ___
3: _______ _____ _ __________ _____ ___
4: _______ _____ _ __________ _____ ___
5: _______ _____ _ __________ _____ ___
6: _______ _____ _ __________ _____ ___
7: _______ _____ _ __________ _____ ___
8: _______ _____ _ __________ _____ ___
9: _______ _____ _ __________ _____ ___
10: _______ _____ _ __________ _____ ___
11: _______ _____ _ __________ _____ ___
12: _______ _____ _ __________ _____ ___
13: _______ _____ _ __________ _____ ___
14: _______ _____ _ __________ _____ ___
15: _______ _____ _ __________ _____ ___