Manualshelf

Administrator's Guide

ManualsBrandsAvaya ManualsBasic Administration ToolsAvaya MultiVantage Software Release 1.2
961962963964965966967968969970
Screen reference
555-233-506970 Issue 5 October 2002
The total number of pages, and the first page of Group Member Assignments, will
vary depending on whether the CBC and Wideband Support pages display.
NOTE:
When supporting DCS, Member Number Assignments must be the same
between nodes (Member #1 must be Member #1 at the far-end trunk group).
Port
When using ISDN-BRI interfaces, B-channel 1 is the port number while B
channel 2 is the port number plus 16. For example, if B channel 1’s port number is
01A1002, then B channel 2’s port number is 01A1018.
When using ISDN-PRI interfaces, the port number will be the one allied with the
B-channel. For example, if the DS1 is located in 01A10, then B channel 1 will be
01A1001, B channel 2 will be 01A1002 and so forth.
Sig Grp
When using ISDN-BRI interfaces, this field becomes unadministrable. Otherwise,
enter the appropriate signaling group number. If a DS1 interface appears in one
signaling group, then the number of that signaling group appears as a default in
the Sig Grp column for any trunk on that interface after the screen is submitted.
This value cannot be altered without adding a DS1 interface to another signaling
group. If a DS1 circuit pack appears in more than one signaling group, then the
Sig Grp field cannot be left blank. One of the signaling group members must be
entered. Enter assigned signaling group number between
1 through 416 or blank.
Related topics
See ‘‘ISDN service’’ on page 1730 for detailed information about Integrated
Services Digital Network trunks.
See ‘‘DS1 trunk service’’ on page 1659 for detailed information on DS1.
ISDN Numbering — Private
This screen supports Private Numbering Plans (PNP). It allows you to specify the
digits to be put in the Calling Number information element (IE), the Connected
Number IE, and the QSIG Party Number for extensions in the Private Numbering
Plan.
Avaya MultiVantage supports private-network numbers up to 15 digits long. If
the total number — including the level 1 and 2 prefixes, the PBX identifier, and
the extension — is more than 15 digits long, neither QSIG PartyNumbers nor the
information elements are created or sent.