Administrator's Guide

Screen reference
555-233-506976 Issue 5 October 2002
ISDN-BRI Trunk Circuit Pack
This screen administers an ISDN-BRI circuit pack. See Avaya MultiVantage™
Solutions Hardware Guide for information on the maximum number of
ISDN-BRI circuit packs that you can administer.
Screen 162. BRI Trunk (using a TN2185 circuit pack)
Cntry/Peer Protocol
Tells call processing software which ISDN protocol standard is applied.
Valid entries Usage
1
to 25 When this field is 10, 12, 13, or etsi, the Protocol Version
field is equivalent to
b on the DS1 circuit pack screen. When
the Cntry/Peer Protocol field is set
10, 12, 13, or etsi, set the
Provol Version field to
b. For all other administered values,
the Protocol Version sets to
a.
etsi
QSIG
When the Interface field is peer-slave or peer-master, this
field must be
QSIG. The choice QSIG is valid only when the
Interface field is
peer-slave.
blank You cannot leave this field blank if the Interface field is set
to a valid, non-blank value
change bri-trunk-board Page 1 of 1
ISDN-BRI TRUNK CIRCUIT PACK
Location: 01A09 Name: ______________
Interface Companding: a-law_ DCP/Analog Bearer Capability: 3.1kHz
T3 Timer Length (sec): 15_
Port Interface Side Cntry/Peer TEI Time Invert Synch Layer 1 Detect
Protocol Fill Bits? Source? Stable? Slips?
1: user_______ 12__ 0__ flags n n n n
2: network____ etsi 0__ ones_ y y y y
3: user_______ 2___ auto flags y n y n
4: peer-slave_ b QSIG 0__ flags n y y n
5: peer-master a QSIG auto ones_ n n n n
6: ___________ ____ 0__ ones_ n n y n
7. ___________ ____ 0__ ones_ n n y n
8: ___________ ____ 0__ ones_ n n y n