Administrator's Guide

ISDN-BRI Trunk Circuit Pack
Issue 5 October 2002 977555-233-506
DCP/Analog Bearer Capability
Detect Slips
Interface
Interface Companding
Invert Bits
Layer 1 Stable
Valid entries Usage
3.1kHz Indicates how to encode the Bearer Capability IE for an
outgoing call originated by a DCP or analog endpoint.
speech
Valid entries Usage
y/n
Tells maintenance software whether slips reported by the
BRI port should be logged.
Valid entries Usage
network
Tells call processing software whether a particular port is
connected to a user/network or a peer interface. These
entries are valid for the TN2185. You can enter
peer-slave
only if the QSIG Basic Call Setup feature is enabled
user
peer-master
peer-slave
Valid entries Usage
a-law
Indicates the companding algorithm expected by the system
at the far end.
mu-law
Valid entries Usage
y/n
Valid entries Usage
y
Tells call processing and maintenance software whether to
expect the network to drop Layer 1 when the BRI port is idle.
Only the TN2185 may be set to
n.
n