Administrator's Guide

Screen reference
555-233-506980 Issue 5 October 2002
Cntry/Peer Protocol
Tells call processing software which ISDN protocol standard is applied.
Interface
Side
Valid entries Usage
1
to 25 When this field is 10, 12, or 13, the Protocol Version field is
equivalent to
b on the DS1 circuit pack screen.
etsi
When this field is etsi, the Protocol Version field is
equivalent to
b on the DS1 circuit pack screen.
QSIG
When the Interface field is peer-master, this field must be
QSIG.
blank You cannot leave this field blank if the Interface field is set
to a valid, non-blank value.
Valid entries Usage
network
Tells call processing software whether a particular port is
connected to a user/network or a peer interface. These
entries are valid for the TN556B. You can enter
peer-master only if the QSIG Basic Call Setup feature is
enabled
peer-master
Valid entries Usage
a
Determines how glare conditions are handled when
Interface field is peer-slave. This field is not administrable
when the Interface field is
network.
b