Administrator's Guide

Screen reference
555-233-506984 Issue 5 October 2002
SPID
A 12-digit field containing the SPID expected by the far end. Avaya
MultiVantage blocks you from changing this field unless the port is busied out or
unadministered. The only protocol supported for SPID initialization is Bellcore
(Country Code 1). Trunks will not be put in service if SPID installation is not
successful.
XID Test
Trunk Member Administration
Administer BRI trunk members using the following scheme to address the
individual B-channels:
■ B-channel 1 uses the port address of the BRI Trunk Port.
■ B-channel 2 uses the port address of B-channel 1 incremented by 16.
When adding a BRI trunk to an ISDN trunk-group, Avaya MultiVantage blocks
you from administering a Signaling Group for that trunk member.
Avaya MultiVantage blocks you from administering a BRI trunk member if the
port has not yet been administered on the BRI Trunk screen.
For example, administer the B-channels on a TN2185 circuit pack inserted in slot
01A10 as follows:
Valid entries Usage
Any string of 1 to 12
digits
Leading zeroes considered significant and not
ignored
Valid
entries Usage
y/n
Indicates whether the far end supports the Layer 2 XID test.
Port B-channel 1 B-channel 2
1 01A1001 01A1017
2 01A1002 01A1018
3 01A1003 01A1019
4 01A1004 01A1020
5 01A1005 01A1021
6 01A1006 01A1022
7 01A1007 01A1023
8 01A1008 01A1024