Stackable Switch Reference Guide

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
230 Avaya P330-ML Reference Guide
Example:
ip access-list-copy
User level: privileged, supervisor.
Use the ip access-list-copy command to copy a configured source policy list
to a destination policy list.
The syntax for this command is:
ip access-list-copy <source-list> <destination-list>
Example:
ip access-list-dscp operation
User level: privileged, supervisor.
Use the ip access-list-dscp operation command to set a DSCP to CoS
mapping.
L On the P334T-ML, the system performs the mapping for only those frames than
match an ACL rule with a “permit” action.
The syntax for this command is:
ip access-list-dscp operation <policy-list-number> <dscp>
<action>
Router-N# ip access-list-cookie 101 12345
source-list integer (100 - 149)
destination-list integer (100 - 149)
Router-N# ip access-list-copy 100 101
policy-
list-
number
A valid id number for a policy list currently defined for the module
(100 - 149)
dscp Range of dscp. For example:
<dscp-range> : [0 - 63] | <low-dscp>-<high-dscp> <low-dscp>-<low-
dscp>: apply the map to all packets with DSCP from <low-dscp> to
<high-dscp>.