Stackable Switch Reference Guide

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Avaya P330-ML Reference Guide 253
show ip icmp
User level: user, privileged, supervisor
Use the show icmp ip command to display the status of ICMP error messages.
The syntax for this command is:
show ip icmp
Example:
show ip interface
User level: user, privileged, supervisor
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface>]|<vlan>|<IP addr>]
Router-N> show ip icmp
ICMP error messages status is ENABLE
interface The name of the interface whose information you
want to display.
vlan The name or ID of the VLAN over which there are
interfaces you want to display.
ip-address The IP address of the interface whose information
you want to display.