Stackable Switch Reference Guide

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 15
The syntax for this command is:
clear utilization cpu <module-number>
Example:
clear vlan
User level: privileged, supervisor.
Use the clear vlan command to delete an existing VLAN and return ports from
this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to
that VLAN are assigned to the default VLAN #1.
The syntax for this command is:
clear vlan [<vlan-id>|name <vlan_name>]
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
Example:
copy module-config scp
User level: supervisor
Use the copy module-config scp command to upload the switch-level
parameters from the current NVRAM running configuration into a file via SCP.
module-
number
The module number for which CPU utilization monitoring is
disabled.
P330-N# clear utilization cpu 1
CPU utilization is cleared on module 1
vlan_id VLAN number
vlan_name VLAN name
P330-N# clear vlan 100
This command will assign all ports on vlan 100 to their
default in the entire management domain - do you want to
continue (Y/N)? y
VLAN 100 was deleted successfully