Stackable Switch Reference Guide

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
82 Avaya P330-ML Reference Guide
Example:
set logout
User level: privileged, supervisor.
Use the set logout command to set the time in minutes before the system
automatically disconnects an idle session.
The syntax for this command is:
set logout [timeout in minutes]
Examples:
• To set the time until the system disconnects an idle session automatically to 20
minutes:
• To disable the automatic disconnection of idle sessions:
set mac-aging
User level: privileged, supervisor.
L This command is available on the P330-ML-ML switches only.
Use the set mac-aging command to enable or disable the MAC aging function.
P330-N# set logging session enable
Done!
timeout in
minutes
Time until the system automatically disconnects an idle
session.
• Setting the value to 0 disables the automatic disconnection
of idle sessions
• Default value is 15 minutes
P330-N# set logout 20
Sessions will be automatically logged out after 20 minutes
of idle time.
P330-N# set logout 0
Sessions will not be automatically logged out.