User's Manual

Avaya P330 Load Balancing Manager User Guide 24
Virtual Form
Area
The Form Area displays the Properties Sheet of the element selected in
the Physical Tree Area.
Status Bar
The Status Bar shows the communication status between Avaya Load
Balancing Manager and a specific device in the network.
The following table shows the possible communication statuses with
their corresponding graphics, and gives a short explanation for each
status.
Saving Configuration Changes
Configuration changes do not take effect until you apply or save the
changes to the device. There are two levels of applying configuration
changes to the load balancing device:
• Applied Changes - Changes are applied to the device, but are
not saved. Applied changes affect the present network
configuration. However, these changes are lost when the device is
reset.
• Committed Changes - Changes are saved to the device.
Committed changes are maintained even when the device is
reset.
Table 2-2. Communication Statuses
Graphic Status Description
Ready The application is ready to
communicate with a load
balancing device.
Communicati
ng
The application is currently
communicating with a load
balancing device.
Communicatio
n Error
The last attempted
communication with the load
balancing device was not
successful.