User's Manual

Chapter 4
37 Avaya P330 Load Balancing Manager User Guide
Server Load Balancing Configuration Overview
Configuring Avaya P330 Load Balancing Manager for SLB involves
several steps. This section provides an overview of the entire process,
and the following sections explain each step in detail.
To configure Avaya P330 Load Balancing Manager to perform SLB:
1. Define one or more Virtual Servers (refer to “Defining a Virtual
Server” on page 38).
2. Define one or more Virtual Services (“Defining a Virtual Service”
on page 39).
3. Define one or more RSGs (refer to “Defining RSGs and RSs for
SLB” on page 47).
4. Define one or more RSs (refer to “Defining RSGs and RSs for SLB”
on page 47).
After you define a new SLB element, click
Send to Device
to apply the
configuration changes to the device. To save the configuration changes,
click
Commit
. For more information about applying and saving changes,
refer to “Saving Configuration Changes” on page 24.