User's Manual

Chapter 4
39 Avaya P330 Load Balancing Manager User Guide
Defining a Virtual Service
After you define one or more Virtual Servers, you can define related
Virtual Services. The Table Area displays the Virtual Services Table when
a Virtual Server is selected in the Logical Tree Area.
To define a new Virtual Service:
1. In the Logical Tree Area, select the Virtual Server to which you
want to add the new Virtual Service.
2. Click anywhere inside the Table Area so that the Table Area
receives the focus.
3. Click
Add
.
Or
Select
Edit > Add
. A row is added to the Virtual Services Table.
4. Enter information about the new Virtual Service in the Properties
Sheet. For more information about entering information in the
Properties Sheet, refer to “Editing the Properties Sheets for SLB”
on page 47.
5. (Optional) You can configure proxy IP addresses for the Virtual
Service. For information on creating proxy IP addresses, refer to
“Proxy IP Editor” on page 41.
6. (Optional) You can add and configure health check methods for
the Virtual Service. For information on creating and configuring
health check methods, refer to “Health Check Editor” on page 43.
* Note: The new information only appears in the Virtual Services
Table after you apply the changes to the device and refresh
the current view.
When you select a service from the Virtual Services Table, the RSG Area
displays the RSGs related to the selected service, and the Form Area
displays the service’s Properties Sheet.