User's Manual

Avaya P330 Load Balancing Manager User Guide 64
Defining a
Connected
RSG
To define a new RSG in relation to other load balancing elements:
1. In the Logical View, select a Virtual Service from the Tree Area or
Table Area.
2. Click anywhere inside the RSG Area so that the RSG Area receives
the focus.
3. Click
Add
.
Or
Select
Edit > Add
. The Add Real Server Group dialog box opens.
Figure 6-1. Add Real Server Group Dialog Box
4. Select
Primary
to create a primary RSG.
Or
Select
Backup for RSG
to create a backup RSG, and select the
primary RSG from the pull-down list box to which you assign the
backup.
5. Select
Create New
to create a new RSG, and enter the RSG’s name.
Or
Select
Select Existing
to define an existing RSG in relation to other
load balancing elements, and select the existing RSG from the
drop-down list.
6. Click
OK
. The RSG is added to the RSG Area.
7. Enter information about the RSG in the Properties Sheet. For
more information about entering information in the Properties
Sheet, refer to “Editing the RSG and RS Properties Sheets” on
page 70.