User's Manual

Avaya P330 Load Balancing Manager User Guide 68
6. Enter information about the new RS in the Properties Sheet. For
more information about entering information in the Properties
Sheet, refer to “Editing the RSG and RS Properties Sheets” on
page 70.
Defining an
RS for an
RSG -
Physical
View
To define a new RS for an existing RSG using the Physical View:
1. In the Physical Tree Area, select the RSG to which you want to
add the RS.
2. Click
Add
.
Or
Select
Edit > Add
. The Add Real Server to Real Server Group
dialog box opens.
Figure 6-4. Add Real Server to Real Server Group Dialog Box -
Physical
3. Select the RS’s IP address from the drop-down list, and click
OK
. A
new RS is added to the selected RSG in the tree.
4. Enter information about the new RS in the Properties Sheet. For
more information about entering information in the Properties
Sheet, refer to “Editing the RSG and RS Properties Sheets” on
page 70.
Defining an
Unconnected
RS
To define an unconnected RS:
1. In the Physical Tree Area, select RSs.
2. Click
Add
.
Or
Select
Edit > Add
. A new RS is added to the tree.
3. Enter information about the new RS in the Properties Sheet. For
more information about entering information in the Properties
Sheet, refer to “Editing the RSG and RS Properties Sheets” on
page 70.