User's Manual

Product Support Notice © 2007 Avaya Inc. All Rights Reserved.
PSN#
PSN001569u
Original publication date: 14-Sep-2007. This is Issue #1, published 14-Sep-
2007.
Severity/risk level
Medium
Urgency
When convenient
Name of problem
CM command "reset ip-station" will not reboot phones which have headset button activated
Products affected
4610 4620SW
Problem description
When issuing a “reset ip-station…” command from SAT terminal on CM, if IP phones have the headset button active, but not on an
active call, or the handset is out of the cradle, these phones will not reboot until headset button is disabled or the handset is put back in
the cradle.
Resolution
Resolved with IPT patch R2.6.01. Also, resolved with R2.8 GA release.
Workaround or alternative remediation
n/a
Remarks
n/a
Patch Notes
The information in this section concerns the patch, if any, recommended in the Resolution above.
Backup before applying the patch
n/a
Download
n/a
Patch install instructions Service-interrupting?
n/a No
Verification
n/a
Failure
n/a
Patch uninstall instructions
n/a
Security Notes
The information in this section concerns the security risk, if any, represented by the topic of this PSN.
Security risks
n/a
Avaya Security Vulnerability Classification
Not Susceptible
Mitigation
n/a