User guide

Configuring BCMS Vu from the Server 4-5

Configuring and Managing the

BCMS Vu

Software

Chapter 4

system. The login must match the BCMS Vu login name administered on

the DEFINITY system.

3. In the “Login Password:” box, type the password that is associated with

DEFINITY system.

4. Select Next.

The “Specify the serial port and telephone number for BCMS Vu to use

to access the switch” window appears.

5. In the “Phone Number:” box type the hunt group extension for Netcon

channels that must be dialed for the data module to connect to the

DEFINITY system.

Note

This DEFINITY system login must have the following

permissions:

• Display Admin and Maint Data

• System Measurements

The DEFINITY system login must not be a “service” login.

Refer to “BCMS Vu Login and Password” in Chapter 2 of

BCMS Vu Software R2 Installation Guide (5850-217-103).

Note

If the following conditions exist, you must change the

password on the DEFINITY system and in BCMS Vu Server

for that login.

• Password aging for the BCMS Vu logon is in effect on

the DEFINITY system, and

• Aging is in effect for the login that BCMS Vu Server uses

to access the DEFINITY system, and

• The password expires.

To eliminate this problem altogether, you may turn off

password aging on the DEFINITY system “add login” form.

To do this leave the password aging field in the next screen

blank. To change login passwords, refer to “BCMS Vu Login

and Password” in Chapter 2 of BCMS Vu Software R2

Installation Guide (5850-217-103).