User guide

Starting BCMS Vu Server Software 2-3
BCMS Vu Server Basics
Chapter 2
Starting BCMS Vu Server Software 2
The BCMS Vu installation program creates a menu item on your PC’s
Start/Programs menu. Refer to BCMS Vu R2 V2 Software Installation Guide for
detailed installation instructions.
Note
The following procedure presumes that whoever installed
BCMS Vu software on the Server accepted the default
program locations. If the installer chose to install the
program icons in a different location (folder), you will have
to go to that location to start BCMS Vu software using the
program icon.
An alternate method of starting BCMS Vu is to use the Find
function of Windows to locate the program file for BCMS Vu
Server (BCMSVuServer.exe) and select it.
Note
If the hardware key is not attached to the PC before you start
BCMS Vu software, the software will be loaded, but the
program will run only in simulator mode when you try to
start it. To view real-time reports and download historical
data from the DEFINITY system, you must attach the
hardware key and restart BCMS Vu Server software.