Installation manual
Table Of Contents
- Preface
- Introduction
- Administering the DEFINITY System and Configuring the Network
- Installing the Data Module, Hardware Key, and Remote Maintenance Line
- Introduction
- Installing the Data Module
- Installing a Hardware Key
- Installing a Remote Maintenance Line
- Installing and Removing BCMS Vu Software
- Installing a Wallboard
- Troubleshooting Problems
Introduction
Chapter 1
Acceptance Criteria 1-19
Acceptance Criteria 1
The software installation can be considered finished when the following
criteria are met:
❐ The data module is installed.
❐ The DEFINITY system has been administered.
❐ pcANYWHERE is installed on the Server PC.
❐ BCMS Vu Server software is installed.
❐ BCMS Vu Client software is installed.
❐ The DEFINITY system is registered with the Server.
❐ All clients are registered with the Server.
❐ A historical data download has been performed from the Server.
❐ One real-time report has been run from each Client.
❐ One historical report has been run from each Client.