Configuration Guide

Chapter 1 Overview 25
R2MFC Media Bay Module Installation and Configuration Guide
Figure 4 on page 25 shows the placement of the power connectors.
Figure 4 R2MFC MBM back
MBM DIP switches
There are DIP switches located on the underside of the R2MFC MBM. These DIP switches are
used to select the DS30 buses from the DS256 bus. These DIP switches must be set before the
R2MFC MBM is installed.
Figure 5 shows the location of the DIP switches.
Figure 5 DIP switch location on the R2MFC MBM
DS256 and
power connector
654 3 21
Off
On
Underside of the R2MFC
DIP switches
Back of the R2MFC MBM