User's Manual

SIP. To successfully convert the software from UNIStim to SIP, the UNIStim software version
on your IP Deskphone must be 062AC5L or higher.
Identify the current version of UNIStim software
For a new Avaya 1200 Series IP Deskphone, follow Identify the current version of UNIStim
software to determine the version number of the UNIStim software on an IP Deskphone.
For
an IP Deskphone already in use, follow
Checking the UNIStim software version on a new
IP Deskphone on page 107
to determine the version number of UNIStim software on an
IP Deskphone.
Checking the UNIStim software version on a new IP Deskphone
1. After assembling the IP Deskphone and turning it on, the display on the
IP Deskphone goes through the following sequence:
• Avaya splash screen appears
• Avaya sonic sound plays
• Avaya banner appears
Following the Avaya banner, the software version appears in the display (F/W
version).
2. Note the UNIStim software version number and write it down. Compare the version
number to the minimum-required UNIStim software version (062AC5L ).
If the version number is equal to or higher than 062AC5L, see
Convert UNIStim
software to SIP software on the IP Deskphone on page 111
.
If the number is lower than 062AC5L, go to the section
Upgrade UNIStim software
to the minimum required UNIStim software
on page 108 and follow the instructions
to upgrade an IP Deskphone to the minimum-required version of UNIStim software
before a conversion to SIP Software.
Checking the UNIStim software version on an IP Deskphone already in use
1. Press the Globe/Services key on the IP Deskphone twice quickly.
If the admin password prompt appears, enter the password 26567*738.
The Local Tools
menu appears:
Table 8: Local Tools menu
1. Preferences
2. Local Diagnostics
3. Network Configuration
4. Lock Menu
Upgrade to the minimum UNIStim Software
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 107