User's Manual

TLV Fields
Unknown Policy Flag (U)—1 only if the policy is
unknown
Tagged Flag (T)—configure accordingly Reserved
(X)-0
VLAN ID—configure accordingly
L2 Priority—configure accordingly
DSCP Value—configure accordingly
Location Identification Discovery Coordinate-based LCI–16 bytes
Civic Address LCI I–variable length
This format can have more than one address element
and
one address element can range from a minimum of
7 to 256 bytes.
ECS ELIN I–variable between 10 and 25 bytes
Although location is received, it is not available to end
user in this release of the SIP Software.
Extended Power-via MDI
Discovery
Power Type = 01–PD Device
Power Source = 00–Unknown
There
is no hardware support for determining the power
source.
Power Priority = 0010–High
Power Value = Maximum power required as shown
below:
1220 =
1230 =
Software Revision Configure to the software version being used; for
example, 0604D97.
Manufacturer Name “avaya-xy”,
where: xy is a 2-digit manufacturer code as shown
below:
1220: Code 04
1230: Code 04
Model Name Contains a string, which specifies the IP Deskphone
model,
for example, “IP Deskphone xxx”, where, xxx is
one of the following values: 1220, 1230.
DHCP
There are two methods of provisioning DHCP.
Device Settings on the IP Deskphone with SIP Software
126 SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013
Comments? [e-mail]