User's Manual

If this server is available on the network, enter the PVQMon IP address.
Table 46: PVQMon IP configuration
PVQMon IP :
0. 0. 0. 0
31. Configure
the NAT Traversal Method. Use one of the following methods to traverse
Network Address Translation (NAT) devices for the IP Deskphone with SIP
Software.
The next five tables show menu items in the Device Settings menu that apply to
configuring the NAT Traversal Method.
• NAT Signal
Select either None, SIP_PING, or STUN to define the NAT traversal mode for
SIP signaling.
Table 47: NAT Signal configuration
• NAT Media
Select either None or STUN to define NAT traversal mode for signaling.
Table 48: NAT media configuration
NAT
Media :
STUN
None
STUN
• NAT TTL:
Enter the Time to Live (TTL) in seconds for the NAT traversal.
Table 49: NAT TTL configuration
NAT TTL :
000
• STUN S1 IP:
Enter an IP address for the STUN S1 IP device.
Table 50: STUN S1 IP configuration
STUN S1 IP :
00. 00. 00. 00
Configure the device settings
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 143