User's Manual

Per-account call notification options
The Call
Settings entry in the User Settings menu provides you with a number of configuration
options relating to how incoming calls for a particular account are treated.
The configuration options are:
• what kind of audio alert you want to use (ring tone, beep, or nothing)
• whether you want the red LED to blink
• whether you want the call to be added to the Incoming Call logs
IM settings
IM Settings is located in the User Settings
menu. Any change in settings on the primary
account takes effect immediately. You can also modify settings for a secondary account, but
the modifications do not take effect until you register the secondary account as the primary
account.
Voice Mail settings
Voice Mail Settings is located in the User Settings menu. You can program different voice
mail addresses and IDs for each account. To access the voice mail of a secondary account,
press
the line key of the secondary account to obtain a dial prompt, and then press the VMail
soft key.
Waiting messages are reported in the following two ways:
• The red LED lights up if any account has a waiting message.
• A shaded envelope icon appears on the line key of each account that has a waiting
message (unless the account is in a call).
Remembering settings after logout
The
IP Deskphone remembers up to 24 sets of configurations for each profile. If you configure
settings for an account and you log off the account, the settings are restored after you log back
onto the account (as either a primary account or a secondary account).
If you log on an account that you did not save the settings in a profile for, the IP Deskphone
creates a new set of default settings for that account. If there are already 24 sets of
configurations in the profile, the IP Deskphone discards one set that is not currently registered
Remembering settings after logout
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 159