User's Manual

• PRIMARY_SERVER_PROFILE <filename>
• SECONDARY_SERVER_PROFILE <filename>
The commands are processed as follows:
1. If the x_SERVER_PROFILE command is specified and contains the x Server Profile
<filename>, the Server Profile file is downloaded to the IP Deskphone during the
standard upgrade mechanism after downloading the System Configuration file.
If the Server Profile file is specified but cannot be downloaded, the IP Deskphone
uses the old Server Profile file, if it exists in the Flash File System (FFS). If there is
no old Server Profile file, the IP Deskphone applies the parameters from the System
Configuration file by default.
For example: PRIMARY_SERVER_PROFILE profile01.dat — applies values from
the profile01.dat file for the Primary server
2. If the x_SERVER_PROFILE command is specified, but the parameter is absent,
the IP Deskphone applies the parameters from the System Configuration file by
default for this server. The old Server Profile file is removed from the FFS.
For example: PRIMARY_SERVER_PROFILE <blank> — uses configuration
parameters taken from the System Configuration file and removes the old Server
Profile file designated for the Primary Server
3. If the „x_SERVER_PROFILE’ command is not specified or is skipped, the IP
Deskphone applies the configuration values obtained from the old Server Profile
file, if it exists. Otherwise, the configuration values are taken from the System
Configuration file by default.
Note:
If the IP Deskphone is reset to factory default, all profiles are removed.
The Primary and Secondary Server Profile file names are displayed in the Server Settings
menu of the IP Deskphone.
Limitations:
Only one server profile can be active at time; this means that in Multi-User mode, the logic is
applied for only the Primary User.
IP Deskphone soft reboot
When a different server profile is applied, changes to certain parameters can cause the IP
Deskphone to perform a soft reboot.
Changes to the following parameters initiate a soft reboot.
FIPS_MODE ENABLE_UPDATE ENABLE_USB_PORT
SFTP_WRITE_PATTERNS SESSION_TIMER_ENABLE USB_HEADSET
Server Profiles
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 187