User's Manual

SLC_AVAYA_CERTIFICATE_EXPIRED_AUTH 0x1002

SLC_SERVICE_PROVIDER_CERTIFICATE_EXPIRED_

AUTH

0x1003

SLC_PROVIDER_CERTIFICATE_IN_AVAYA_KEYS_FI

0x1004

SLC_PKI_MGMT_INIT_FAILURE 0x1005

The following is the Security Policy parameter change event.

SECURITY_POLICY_PARAM_CHANGE 0x1055

Any changes made to the security policy file has an entry in the security log file. For more

information, see

Security policy file updates on page

261.

Fault management behavior

Authentication failures are indicated by a failure message on the IP Deskphone screen and

are reported to the error log files. The administrator can view the security logger by using the

PDT or the security log viewer. For more information, see

Security and error logs on

page

259.

The following is a list of authentication failure messages that appear on the IP Deskphone

screen when a failure occurs during the operation of the IP Deskphone:

• EAP Authenticate-Fail—happens when the IP Deskphone fails to authenticate to an

authentication server; the message applies for the three EAP methods: EAP-MD5, EAP-

PEAP, and EAP-TLS.

• EAP Authenticate-Timeout—happens after the third time the IP Deskphone fails to

authenticate to an authentication server and the IP Deskphone is connected to an EAP

disabled port on the Layer 2 switch.

For EAP failures logged in the security log, see

Diagnostic logs on page 267

Fault management behavior

SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 269