User's Manual

This chapter explains how to:
• configure the provisioning server and the DHCP server. Note: The provisioning server is
where the software and the configuration files for the IP Deskphones.
• convert an IP Deskphone with UNIStim software to an IP Deskphone with SIP software
• provision the Device Settings parameters on the IP Deskphones with SIP software
Important:
Converting the software on an IP Deskphone from UNIStim software to SIP software
overwrites the UNIStim software. The IP Deskphone cannot operate in both modes
simultaneously. A switch from UNIStim to SIP software or SIP to UNIStim software requires
a software reload.
The following figure shows the main components of the 1230 IP Deskphone with SIP
software.
Figure 1: Avaya 1230 IP Deskphone with SIP Software
Overview
30 SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013
Comments? [e-mail]