User's Manual

•
SSHID <user name>
•
SSHPWD <user password>
.
4.
Press the Services soft key and select 4.Check for Update. Press the YES soft
key to update the IP Deskphone configuration.
5. Connect to the IP Deskphone by using any SSH client program.
The PDT supports the following set of commands:
Table 115: List of PDT commands
# Command Description
1 prtlog >prtlog<mngr_dest>
• Prints the content of the ECR-log file.
•
Outputs content of the specified log file to
stdout (the screen, a stream, stdout, or a
string). The input parameter specifies a type
of logging manager:
- 0 (default) — ECR-log file
- 1 — SIP-log file
If the input parameter is incorrect, the
following notification appears:
>prtlog: incorrect type of manager <x>
2 clearLogFile Clears the content of the ECR-log file
3 setLogLevel <loglevel> Configures log level, where the loglevel is in the
range 0...3:
• If loglevel = 0 — logging is disabled
• If loglevel = 1 — logging only Critical errors
• If loglevel = 2 — logging Critical and Major
errors
• If loglevel >=3 — logging any type of errors
4 printLogLevel Prints log level
5 setRecoveryLevel <reclevel> Sets up recovery level, where the reclevel is in
the range 0...3. If the Auto Recovery option is
ON, the IP Deskphone behaves as follows:
•
If reclevel = 0 — recovering is disabled
• If reclevel = 1 — recovering on only Critical
errors
• If reclevel = 2 — recovering on Critical and
Major errors
• If reclevel >= 3 — recovering on any errors
Diagnostics and troubleshooting
348 SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013
Comments? [e-mail]