User's Manual

# Command Description
6 printRecoveryLevel Prints recovery level
7 taskMonShow Prints a list of monitored tasks
8 "i" Prints all task information
9 ti <taskName | task id> Prints task information
10 memshow [level] Shows memory information
11 checkStack <taskName | task
id>
Checks stack of some task
12 tt <taskName | task id> Prints Task Trace
13 info Prints HardwareID, SoftwareID, MAC and BT
address
14 prtcfg Prints content of the IP Deskphone
configuration file, SystemConfig.dat in FFS.
The file contains IP Deskphone-specific
configuration. The content of this file is formed
from the content of several downloadable
configuration files:
•
Device Configuration file
• Tones file
• Language file
15 lsr Lists directory contents (similar to unix Is) and
the contents of a directory and any of its
subdirectories
16 ping <host ip> [# of pings] Pings any host (ping)
17 tracert <host ip> [max hops] Traceroute to any host (tracert)
18 netinfo Prints common network information
19 routeshow Displays host and network routing tables and
stats
20 arp Displays entries in the system ARP table
21 listcerts Lists all trusted certificates
22 printcert <index> Displays certificate details
23 sipapp <start | stop> Starts or stops the SIP application
24 sendunistim <xx xx....> Sends UNIStim message
25 rxunistim <on | off Displays UNIStim messages from the Core
26 txunistim <on | off Displays UNIStim messages to the Core from
the SIP application
PDT commands
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 349