User's Manual

# Command Description
27 sendevent <0xmmm <0xnnn> Simulates an UNIStim event.
28 lcdparam Sets up LCD parameters for the IP Deskphone
29 audio <hs | hd | hf | off> Loopbacks audio to handset/headset/
Handsfree
30 display <on | off> Turns all LCD and LED on or off
31 keypress <on | off> Turns all key presses on or off
32 clearlog
>clearlog<mngr_dest>
Clears content of the specified log file. The input
parameter specifies the type of logging
manager:
•
0 (default) — ECT-log file
• 1 — SIP-log file
If the input parameter is incorrect, the following
notification appears:
>clearlog: incorrect type of manager <x>
33 removelog
>removelog<mngr_dest>
Removes the specified log file.
The input parameter specifies the type of
logging manager:
• 0 (default) — ECR-log file
• 1 — SIP-log file
If the input parameter is incorrect, the following
notification appears:
>removelog: incorrect type of manager <x>
34 reset2factory >reset2factory Resets the IP Deskphone to the default setting.
See
Activating Reset to Factory Setting using
SSH_PDT on page 323
.
You can request the following commands to the support team if you have any issues:
• printSetInfo
• prtcfg
• prtlog 0
• prtlog 1
• netinfo
• arpShow
• memShow
• routeshow
• i
Diagnostics and troubleshooting
350 SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013
Comments? [e-mail]