User's Manual

The command ( i ) displays the list of tasks with TID and STATUS fields. For every task that
has a SUSPEND status in the list, enter the following commands:
ti 0x. <TID>
tt 0x <TID>
checkStack 0x <TID>
To print out a list of all supported commands and a short description of each, enter the "?"
command when the PDT prompt is displayed, as shown in this example:
PDT> ?.
Device configuration file
The following table describes the configuration commands in the device configuration file for
alarms, logs and diagnostics.
Table 116: Alarms, logs and diagnostics configuration commands
Component Flag Description
PC Port Mirroring parameter
which can be modified in the
Advanced Diag Tools
dialog.
PORT_MIRROR_ENAB
LE
Determines whether the option
can be managed or not.
•
If PORT_MIRROR_ENABLE is
configured as YES, The Port
Mirroring prompt in the
Advanced Diag Tools dialog is
enabled, and you can activate
or deactivate the option.
• If PORT_MIRROR_ENABLE is
configured as NO, the Port
Mirroring prompt in the
Advanced Diag Tools dialog is
disabled (dimmed); the option
is deactivated by force and you
cannot manage the option.
• The values are YES and NO.
The default value is NO
(disabled).
Memory Monitor. MEMCHECK_PERIOD Determines the time period in
seconds when the Memory
Monitor wakes up (after start-up
Device configuration file
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 351