User's Manual

• [LOGIN_BANNER] — section for the log in banner files
• [USER_CONFIG] — section for IP Deskphone-specific configuration file
IP
Deskphone-specific configuration files support customizing the IP Deskphone on a per
IP Deskphone/user level. Parameters in the device configuration file can be overwritten
with a IP Deskphone-specific configuration file.
Mandatory keywords in the Provisioning file are:
• VERSION [xxxxxx] — where xxxxxx is a six- to ten-digit number representing the version
of the file on the server. The version of the module is specified in this field. The command
is used for version comparison in AUTO mode. VERSION is mandatory for all sections.
In the FW section, the software version of the load located on the provisioning server must
be entered in this field. For all other sections, VERSION is just a counter that can be
incremented if it is necessary to download a new file version.
Note:
The version number of the firmware [FW] can be longer, up to 19 characters, and must
follow this format:
Example: SIP12x004.01.03.00
Caution:
The
version number is stored permanently on the IP Deskphone until a higher version
number is downloaded. However, if the Forced option is in the 12xxSIP.cfg file, then
the file is forced to download and the version number in the IP Deskphone is overwritten
with the version number in the 12xxSIP.cfg file.
• DOWNLOAD_MODE [AUTO | FORCED] — defines whether the version is checked. This
command is optional. If this command is not present, AUTO mode is used as the
default.
- AUTO - This mode compares the version of the module from the VERSION field and
the version of the module version stored in the FLASH memory of the IP Deskphone.
The file download is initiated only if the version specified is higher than the current
version stored in the IP Deskphone. If the version is not applicable, as in the case
of language files, the date of the file must be used for the decision.
Caution:
The version number stored in the FLASH is permanent until a higher number is
downloaded
from the Provisioning file or you select Srvcs > System > Erase User
Data on the IP Deskphone.
- FORCED - This mode forces the software download process. FORCED can be used
for software downgrade procedures.
Configure the provisioning server
44 SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013
Comments? [e-mail]