User's Manual

Note:
ENABLE_UPDATE is provisioned after user logoff.
• PROMPT_ON_LOCATION_OTHER [YES | NO]
- YES - prompt the user to select new location if location “other” was previously
selected.
- NO - do not prompt the user to select new location if location “other” was previously
selected. This is the default option.
• VMAIL [vmail_number] — is the voice mail address, which can be the URI or the DN
number of the voice mail server. This command takes a string as a parameter. This is the
default link for a new user profile only. Individual users can customize the link through
Prefs > Message Options > Voice Mail Settings. This command has no effect on the
user profiles after it is created.
- vmail_number - the number or URI of the voicemail server.
• VMAIL_DELAY [x] — is a delay, configured in milliseconds, between when the voice mail
server answers the call and the start of dialing the voice mail user ID. The default value
is 1000ms.
- x - the delay in milliseconds
• LLDP_WAITING_TIME [timeout_sec] — This parameter allows the administrator to
configure the timeout in seconds the IP Deskphone should wait for the LLDP response.
The allowed values of the parameter are from 30 to 300 seconds. The default value is 30
seconds.
— timeout_sec – timeout value in seconds
• IP_OFFICE_ENABLE [YES | NO] — This parameter is a command that specifies if IP
Office-specific features are active on the IP Deskphone or not. The default value is NO.
- YES – IP Office-specific features are active.
- NO – IP Office-specific features are not active.
• IPOFFICE_CONF_CODE [opt_string] — This parameter allows the administrator to
configure the Conf soft key. If the parameter is configured, the IP Deskphone user is able
to call the IP Office option "Conference".
— opt_string = code of the Conference option
Example:
IPOFFICE_CONF_CODE *3
Note:
The option is available if IP_OFFICE_ENABLE is YES.
Create the device configuration file
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 57