User's Manual
OR
- 1 - turns on the Autologin feature.
- 0 - turns off the Autologin feature.
- 2 - enables the Autologin ID feature using the User ID specified in
AUTOLOGIN_ID_KEY01 and the password specified in
AUTOLOGIN_PASSWD_KEY01 to register and authenticate. Both userid and
password must be specified.
The AUTOLOGIN_ID_KEY01 and AUTOLOGIN_PASSWD_KEY01 parameters are
defined in the IP Deskphone-specific configuration file.
Note:
When using this setting, the user is prevented from logging off the
IP Deskphone.
Note:
If Autologin ID is enabled in the IP Deskphone-specific configuration file, it is
recommended that AUTOLOGIN_ENABLE be configured as either Yes/No or 1/0 in
the device configuration file.
This recommendation facilitates migrating an IP Deskphone that uses the
IP Deskphone-specific configuration file to not using the IP Deskphone-specific
configuration
file. The migration to just using the device configuration file can be done
by deleting the IP Deskphone-specific configuration file. If the device configuration file
does not have the matching parameters in the IP Deskphone-specific configuration file,
the IP Deskphone continues to use the previously assigned settings after the
IP Deskphone-specific configuration file is deleted. This recommendation applies to
other parameters in the IP Deskphone-specific configuration file.
• AUTOLOGIN_AUTHID_KEYxx — is used for auto login when the
AUTOLOGIN_ENABLE method is configured to USE_AUTOLOGIN_ID.
If the config file does not contain AUTOLOGIN_AUTHID_KEYxx, the client uses the
value from AUTOLOGIN_ID_KEYxx.
• PROMPT_AUTHNAME_ENABLE — is used to determine if the authentication ID screen
is presented to the user. The default value is NO.
- YES - after the user login name is entered, the authentication ID screen appears.
- NO - after the user login name is entered, the password screen appears.
• AUTO_UPDATE [YES | NO] — is a command to enable or disable the automatic updating
of the IP Deskphone with SIP Software configuration files from the provisioning server.
Enabling this command causes the IP Deskphone with SIP Software to check for updates
once every day. The default is disabled.
- YES - turns on the AUTO_UPDATE feature.
Create the device configuration file
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 59