User's Manual

• USE_BG_IMAGE <image filename> — used to configure the background image for the
display of newly created profiles by specifying a file name available on the FFS.
BG_IMAGE_ENABLE must be configured as Y in order to select a background image.
Note:
Image files for the IP Deskphone must be in PNG format.
• SPEEDLIST_KEY_INDEX <feature key index> — used to specify the programmable
key used for displaying the Speed Dial List. If the specified index does not exist on the
IP Deskphone, or is invalid, the speed dial list is not displayed on the IP Deskphone.
The IP Deskphone retrieves the device configuration through provisioning. If the
SPEEDLIST_KEY_INDEX flag is configured to a valid programmable key that can be
used for the feature, for example, >1 and less than or equal to available number of
programmable keys, then the IP Deskphone verifies if it has previously loaded a "Speed
Dial List" file (a file containing the contents of the speed dial list). This file is similar to the
dialing plan file. It needs to be properly configured and uploaded to the IP Deskphone
through provisioning. The IP Deskphone parses the file, and configures the feature key
specified by SPEEDLIST_KEY_INDEX to hold the Speed Dial List. If the key defined for
use by the Speed Dial List is already in use, the key is overwritten and the key is assigned
speed dial list functionality. The Speed Dial List feature key then uses the label that is
provisioned in SPEEDLIST_LABEL which cannot be modified by the end user.
• SPEEDLIST_LABEL <text> — a feature key label used by the speed dial list feature key.
The default value is SDL.
• MAX_APPEARANCE [x] — defines the maximum number of possible active calls on the
IP Deskphone. The values are 1 to 12. . The default value is 10.
- x – the maximum number of possible active calls
• MAX_BLFCALLS [x] — defines the maximum number of available Busy Lamp Field
(BLF) calls on the IP Deskphone. The values are 1 to 10. The default value is 10.
- x – the maximum number of available Busy Lamp Field (BLF) calls
The MAX_BLFCALLS parameter value cannot be greater than the
MAX_APPEARANCE parameter value. If the value of the MAX_BLFCALLS parameter
is greater than the value of the MAX_APPEARANCE parameter, the value of the
MAX_BLFCALLS parameter is reduced by force and takes the value of the
MAX_APPEARANCE parameter (MAX_BLFCALLS = MAX_APPEARANCE).
• BLF_ENABLE [Y | N | SCS | SIPX] — used to enable or disable the Busy Lamp Field
(BLF) feature support. If configured as Y, the flag BLF_RESOURCE_LIST_URI is not
ignored and the BLF feature is used. The values are Y, N, SCS, and SIPX. The default
is N.
When BLF_ENABLE has the SCS or SIPX value, the BLF_RESOURCE_LIST_URI
parameter is ignored and the IP Deskphone autogenerates an URI of the following format:
~~rl~C~<username>@<domain>
Configure the provisioning server
72 SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013
Comments? [e-mail]