User's Manual

• BLF_RESOURCE_LIST_URI <blf uri> — used to configure the Busy Lamp Field (BLF)
resource list URI for the BLF feature. You must use the URI provided by the proxy when
properly configuring the user for BLF.
The <blf uri> is the server provided URI to subscribe for BLF notifications, for
example, [e-mail] .
• FM_PROFILES_ENABLE [YES | NO] — This parameter allows the user to perform
actions on User Profiles using the file manager. The default value is YES.
- YES – allows the user to perform actions on User Profiles using the file manager
(default). - .
- NO – does not allow the user to delete or copy User Profiles on the IP Deskphone
or USB drive using the file manager
• FM_LANGS_ENABLE — This parameter allows the user to perform actions on
Languages files using the file manager. The default value is YES.
- YES – allows the user to perform actions on Language files using the file manager
(default). - .
- NO – does not allow the user to delete or copy Language files on the IP Deskphone
or USB drive using the file manager
• FM_SOUNDS_ENABLE [YES | NO] — allows the user to act on WAV files using the file
manager. If the value is configured as NO, the IP Deskphone cannot perform any actions
on WAV files, such as delete or copy a wav file, through the file manager. If the user
selects a WAV file on the IP Deskphone and presses the Delete or Send Context-
sensitive softkey, an error message appears. If the value is configured as YES, the user
can delete or copy WAV files with the file manager interface (this applies to WAV files on
the IP Deskphone). The values are YES and NO. The default value is YES.
- YES — allows the user to delete or copy WAV files on the IP Deskphone through
the file manager
- NO — does not allow the user to delete of copy WAV files on the IP Deskphone
through the file manager
• FM_IMAGES_ENABLE [Y | N] — allows the user to act on JPG and PNG files using the
file manager. The values are Y and N. The default value is Y.
• FM_CERTS_ENABLE [Y | N] — allows the user to act on CER and PEM files using the
file manager. The values are Y and N. The default value is N.
• FM_CONFIG_ENABLE [Y | N] — allows the user to act on CFG files using the file
manager. The values are Y and N. The default value is N.
• FM_LOGS_ENABLE [Y | N] — allows the user to act on CFG files using the file manager.
The values are Y and N. The default value is Y.
• HOTLINE_ENABLE [Y | N] — indicates if Hotline Service is enabled or disabled. The
values are Yes and No. The default value is No.
• HOTLINE_URL — used as the To field of INVITE message by the SIP IP Deskphone to
notify the Proxy Server that this is a call from a Hotline Deskphone. The HOTLINE_URL
Create the device configuration file
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 73