User's Manual

• MEMCHECK_PERIOD <nnnnn> — used to determine the time period in seconds when
the Memory monitor wakes up (after re-start or the last memory check attempt). The
values are 1800 (0.5 hrs) to 86400 (24 hrs). The default value is 86400 (24 hrs).
• DOS_PACKET_RATE — determines the maximum number of packets per second that
is allowed.
• DOS_MAX_LIMIT — specifies how many packets past the DOS_PACKET_RATE the IP
Deskphone can receive before packets are dropped. If packets are received at a rate of
DOS_PACKET_RATE +1, then packets are dropped after the time specified in
DOS_MAX_LIMIT (in seconds).
• DOS_LOCK_TIME — specifies the amount of time (in seconds) that the IP Deskphone
stops processing packets after DOS_MAX_LIMIT is reached. If DOS_PACKET_RATE is
< 1, other values are ignored and packets are not dropped.
• LOGSIP_ENABLE [YES | NO] — used to enable or disable SIP-logging. The values are
YES and NO. The default value is NO.
- YES — the SIP-logging Manager is active and starts to log SIP incoming and
outgoing packages into the log file in FFS.
- NO — the SIP-logging Manager is not active and cannot log SIP incoming and
outgoing packages into the log file in FFS.
• CUST_CERT_ACCEPT — a Security Policy parameter that controls further signing of a
customer root certificate (not the first one). The values are VAL_NO_MANUAL,
VAL_MANUAL_A, and VAL_MANUAL_B. The default value is VAL_MANUAL_A.
• CERT_ADMIN_UI_ENABLE [YES | NO] allows you to access the Certificate
Administration User Interface. The values are YES and NO. The default value is NO.
• SEC_POLICY_ACCEPT allows you to accept security policy. The default value is
VAL_MANUAL_A. Following are the acceptable parameters:
- VAL_MANUAL_A — If the resource file is not signed and if there are no customer
certificates, then Finger Print Display and Accept/Reject options appear .
- VAL_MANUAL_B — If the resource file is not signed and if there are no customer
certificates, enter the Finger Print Value manually and then select Accept option.
• SECURITY_LOG_UI_ENABLE [YES | NO] — allows you to access the Security and
Error Logs User Interface. The values are YES and NO. The default value is No.
• KEY_SIZE — the default key size that is used when generating keys on the IP
Deskphone, and acts at the minimum allowed key size that is enforced when loading
certificates from the IP Deskphone. The values are 1024, 1536, and 2048. The default
value is 1024.
• KEY_ALGORITHM — the preferred key generation algorithm. The accepted value is
KEY_ALG_RSA.
• TLS_CIPHER — the preferred TLS Cipher used for HTTPS to configure a stronger cipher
preference when available. The values are RSA_WITH_AES_128_CBC_SHA, and
Create the device configuration file
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 75