User's Manual

telephone number or service point. You can select the country-specific tone. The default
tone is the North American tone.
- frequency1 - the frequency of tone 1.
- frequency2 - the frequency of tone 2.
- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
- off_time - the duration when no tone is played.
The following is an example of RINGING_TONE:
440,480; 2000,4000 (440 and 480 Hz with 2 seconds on, 4 seconds off)
• BUSY_TONE [frequency1 | frequency2 | on_time | off_time] — used to select the tone
advising the caller that the telephone number is busy. You can select the country-specific
tone. The default tone is the North American tone.
- frequency1 - the frequency of tone 1.
- frequency2 - the frequency of tone 2.
- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
- off_time - the duration when no tone is played.
• FASTBUSY_TONE [frequency1 | frequency2 | on_time | off_time] — used to select
the tone advising the caller that the telephone number is busy. It is fast in cadence or
frequency. You can select the country-specific tone. The default tone is the North
American tone.
- frequency1 - the frequency of tone 1.
- frequency2 - the frequency of tone 2.
- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
- off_time - the duration when no tone is played.
• CONGESTION_TONE [frequency1 | frequency2 | on_time | off_time] — used to select
the tone advising the caller that the groups of lines or switching equipment necessary for
setting up the required call, or for the use of a specific service, are temporarily engaged.
You can select the country-specific tone. The default tone is the North American tone.
- frequency1 - the frequency of tone 1.
- frequency2 - the frequency of tone 2.
- on_time - the duration of the tone when it is on. A -1 indicates a continuous tone.
- off_time - the duration when no tone is played.
The IP Deskphone supports using WAV files to replace the ringtone Frequency/Cadence
pattern. For a system-wide setting, the country default values can be used.
Configure the provisioning server
80 SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013
Comments? [e-mail]