User's Manual

- 1 - IP Deskphone recovers from Critical error
- 2 - IP Deskphone recovers from Major and Critical errors
Default is 255, which is equivalent to the recovery level of 2.
• LOG_LEVEL [x] —
This parameter defines which IP Deskphone bugs are logged in the
ECR file. The following values are used for configuring the logging level on the IP
Deskphone.
x - level of bugs from 0 to 255. The default value is 2.
- 0 - logging is blocked
- 1 - log only Critical bugs
- 2 - log Critical / Major bugs
- 3- log Critical / Major / Minor bugs
- if >= 4 – log all information and bugs
Note:
LOG_LEVEL 4 is intended for debug purposes only. Do not set LOG_LEVEL to 4 or a higher
value unless you are instructed to do so by Avaya support.
Create the IP Deskphone-specific configuration file on the
provisioning server
If the IP Deskphone encounters a [USER_CONFIG] section while parsing the 12xxSIP.cfg
configuration file, the IP Deskphone downloads the IP Deskphone-specific configuration file
SIP<mac id>.cfg.
IP Deskphone-specific configuration files support customizing the IP Deskphone on a
IP Deskphone/user level. Parameters in the device configuration file can be overwritten with
a IP Deskphone-specific configuration file.
Most
of the parameters in the IP Deskphone configuration file are saved on the IP Deskphone.
Removing a parameter from the IP Deskphone configuration file does not change the
parameters saved on a configured IP Deskphone. If a parameter is configured only in the
IP Deskphone-specific configuration file, removing the IP Deskphone-specific configuration file
does not clear the setting.
Important:
If the 12xxSIP.cfg configuration file contains a [USER_CONFIG] section, Avaya
recommends
that DOWNLOAD_MODE be configured as FORCED. This is a global setting
for all IP Deskphones used to determine if the mac id file should be read. Alternatively, if the
user wants to use DOWNLOAD_MODE configured to AUTO, when a change is made to
any mac id file the version number should be incremented so that all IP Deskphones read
the file.
Create the IP Deskphone-specific configuration file on the provisioning server
SIP Software for Avaya 1200 Series IP Deskphones-Administration September 2013 85