User guide

Installing the i2004 Internet Telephone 10
Internet Phone User Guide Nortel Networks
Enter requested information in the menu fields by pressing the number keys on
the dialpad. Press the * key to enter a period (".") when entering the set's IP
address.
Pressing OK will record the entry and advance the initialization to the next
parameter. Pressing CANCEL will abandon the manual configuration process
and restart the power-up process.
Each parameter must have a corresponding entry. An error "beep" will notify you
if you attempt to advance to the next parameter without a field entry.
The following table defines the required parameters.
Table 1
i2004 Installation Parameters
Parameter Definition
SET IP IP address for the i2004 Internet Telephone
NETMASK Net submask
DEF GW Default gateway IP network address
S1 IP IP address of the communications server
S1 PORT Listening port of the communications server
S1 ACTION Enter 1 for UNIStim
S1 RETRY COUNT Primary retry count (value from 0-255, enter 10)
S2 IP Enter value for “S1 IP”
S2 PORT Enter value for “S1 PORT”
S2 ACTION Enter value for “S1 ACTION”
S2 RETRY COUNT Enter value for “S1 RETRY COUNT”
Your system platform may require additional parameters. See your system
specific User Guide for details.