User guide

Installing the i2050 Software Phone 32
Internet Phone User Guide Nortel Networks
Steps to Install the USB Audio Headset
1. Connect the coiled lower cord to the headset cord with the Quick Disconnect
connector. Ensure the Quick Disconnect is securely fastened.
2. Connect the headset cord to the RJ9 jack on the adapter.
3. Connect the USB cable to the headset adapter and to one of the USB jacks
on the back of your PC or USB hub.
4. The first time the headset adapter is plugged in, there will be a delay while the
Windows operating system configures the device and locates appropriate
driver software. During the installation you may be prompted to supply the
original Windows CD ROM so that the Windows operating system can locate
drivers.
USB FAQ
• My computer doesn’t have USB, can I use an add-on USB card?
The computer must have a USB connector. The USB Headset has not been
tested on USB add on or upgrade cards. Performance or operation is not
guaranteed of these cards.
• I don’t have enough USB ports available, can I use a USB hub?
The USB Headset has been tested successfully behind a variety of USB
hubs. It is not practical to test on all of them but no issues have been
uncovered on the ones that have been tested. For best results, use a
powered hub.
Optional In-Use Indicator (not provided with kit)
A 2.5mm output jack is provided next to the USB connector for activation of a
visual in-use indicator such as the 1127P Desktop Visual Alerter from Algo
Communication Products Ltd. [phone] / [e-mail] or
equivalent.